Skip to content or navigation


Viewpoint: It’s the Simple Stuff That Matters

Buildings are complex things but the tools that all stakeholders will engage in will succeed best when they are simpler. There’s no monopoly of good ideas around the construction site so why should digital tools AECO users employ remain complex when evidence shows that simpler digital tools are easier to share?

In 1974, shortly after graduating from the Cooper Union School of Architecture, George Chaikin invented a quietly elegant technique for drafting curved lines of remarkable complexity using only a compass and straightedge. “Chaikin’s Algorithm”, as it is now known, approximates smoothly curved lines by progressively cutting the corners off a series of connected straight line segments. If more smoothness is needed, the draftsman simply knocks off another set of corners. And so on and so on until the desired smoothness is achieved.

To someone who has drafted by hand, this algorithm is intuitively obvious. In fact, the explanation probably sounds a bit silly. However, It turns out that this algorithm also makes it possible for computers to represent smooth curves. Mathematically, Chaikin’s Algorithm produces quadratic Bezier curves. In other words, Chaikin’s algorithm creates the same kind of curves that Adobe Illustrator does.

01 - A diagram showing the beginning steps of Chaikin's Algorithm. (image source: UC Davis, All rights reserved.)

01 – A diagram showing the beginning steps of Chaikin’s Algorithm. (image source: UC Davis, All rights reserved.)

I had the good fortune to study with George at Cooper Union when I was a student there in the early ‘90’s.  George’s computer class (the only one taught at the time in the School of Architecture) was an unusual sort of class. Perhaps more like a design studio than a programming class. I learned, based on things like George’s curve drawing algorithm, that a pencil is a pretty powerful piece of design technology and there are not many forms that can’t be precisely described with one.

Of course, computers can draw 3D form on screen many orders of magnitude faster than I can with a pencil on paper. Graphics pipelines running on specialized hardware can transform and draw 3D models at 30+ frames per second. With a pencil, my (personal) frame rate is probably less than 1 frame per minute. For a really simple model. Computers are always faster, and faster is always better. Right? To members of the first fully digital generation, this probably sounds pretty obvious. But if all I want is a single 2D view of a 3D object, paper and pencil is probably about as fast as modeling the entire object and letting the computer draw that 2D composition  for me.

The transformative moment for me, when drawing on a computer changed the way I design, came when I wanted to have a look at what I was designing from some point of view that I didn’t know I was going to want when I started. When I picked up the model and spun it around. As I moved my point of view, I got a smooth transition — I could watch the model move by in front of my eyes. I didn’t get lost. I could have a cinematic sort of experience as I zipped from place to place in the model, experiencing multiple points of view as quickly as I could move my mouse. The computer transformed the experience of space simply by drawing fast enough that I could see past the individual frames and fall into the immersive spatial experience we call “3D”.

Simpler Will Reign

If the success of SketchUp is any indication, the design tools of the future will not only work primarily in 3D, but they will be much simpler than what we’re using today – simple like a pencil and straightedge is simple. As designers, we’ve got about all the “powerful” we need for a while. If you’re like me (and like most software users), you use less than 10% of the features available to you more than 90% of the time. The word processor I’m using to write this essay has about a dozen buttons in the toolbar, of which I’ve used a total of three. I downloaded it for free from the web, and this essay is the first time I have ever used it. This is a great tool for writing. Not particularly “powerful” from a feature perspective, but it does every single thing I need a word processor to do.

quote_1_vp_bacus2

Simple tools are not just easier to use. They are also easier to share. When we released a free version of SketchUp back in 2006, we found that both architects and their clients started building and editing 3D models. Some architects were threatened by this, but I think in the end it lead to much better design work all around. If your client has an idea about where the front window should go, showing you that idea in a 3D model is just so much more effective than trying to describe it verbally. To be historically fair, clients also know how to use pencils to communicate their design ideas. The really great thing about sharing tools isn’t really that projects move faster (although the business minded folk are tempted by that) but rather that there is more time to iterate. More time to improve the design and work the bugs out of it. More time to make the design a really great design. This is the real democratization of design, happening right now, right under our noses.

Collaboration shouldn’t be reserved just for the formal members of a design team. There’s no monopoly on good ideas around a construction site— attempts to assert managed process on that flow with clipboards, meetings, paper and pencil seem now more of an impediment than benefit. Why should it be that news of the funny animated gif my plumber found over lunch is able to reach me faster than the news that he discovered a bust in the design? We need denser, tighter and faster loops of communication around projects. But if those systems are any more complex to use than Facebook, we’re unlikely to recognize much benefit from their imposition.

Collaboration and the Essential

But there are other scales of collaboration to consider as well. As any architect knows, cities are a form of collaboration as well– just operating on a different time scale. Every building that is designed exists in the context of something else, some other structure on an adjacent site. With the explosion of publicly available geographic data, buildings don’t have to be designed in a vacuum. Reasonable approximations of site and adjacent buildings are easily available for free. In fact, with a little collaboration from everybody, a reasonable approximation of every building in the entire world in 3D could be available. 3D Warehouse, in fact, is full of such building models. Imagine, as an architect, what you could do with that.

But there are certainly situations where what you really need is less information, not more. Contemporary design technology offers the promise that everything – every brick, duct and floor tile – can be represented in a single building model. In my experience, only a small subset of all possible information about a building is really important when making design decisions.  Especially up front in the process when nailing down too many details will limit the future decisions you might make. How do you gradually apply “meaning” to a model over time rather than just hammering it all in at the beginning of the process? Software tools should help you to do this, not force you to adapt to their logic.

Advertisement

Buildings are complex things, and can be hard to fully grok even under the best circumstances. Abstraction is a powerful tool that can help to focus attention on just the right pieces of information at the right time. As Van Gogh instructed, one must “exaggerate the essential and leave the obvious unclear.” Nobody needs to be reminded that gravity points down, nor do they need to be barraged with irrelevant little details that won’t ever add up to anything significant.

What matters is the essential stuff — the few simple issues that really drive the design. I expect that computer science will continue to learn how to manage massive quantities of information, and how to distill them down to just the essential abstraction. Internet search technologies are already inspiring examples of how well this can work. This is still an unsolved problem in the 3D space of architectural design. It is always good to have an interesting problem to work on, though.

About the Author

John Bacus is Product Management Director, Sketchup at Trimble Navigation, where he is responsible primarily for growing the SketchUp family of products. Prior to joining Trimble as part of the acquisition SketchUp from Google, he was SketchUp’s Product Manager at Google and prior to that Director of Product Design at @Last Software, SketchUp’s original developer.

3612c33

John has a MArch. from Rice University and a BArch. from The Cooper Union for the Advancement of Science and Art. Prior to his career in the software world John was a professional design consultant working on a wide range of architectural and urban design projects in both Europe and the United States.

Just For You

John Bacus of Trimble says AR is Bigger than VR…and Discusses Importance of “Trimble Connect”

Reader Comments

  1. RT @SketchUp: Simple is powerful. What’s that mean anyway? Read: https://t.co/Cm5mtO8T7k on @architosh

  2. RT @SketchUpBryce: Great article on simplicity and construction from @jbacus – https://t.co/OjLvvP6qwa

  3. John Bacus #sketchup on https://t.co/EsZA0nwJOZ https://t.co/5b7BNkaJo1

  4. RT @SketchUpBryce: Great article on simplicity and construction from @jbacus – https://t.co/OjLvvP6qwa

  5. RT @SketchUp: Simple is powerful. What’s that mean anyway? Read: https://t.co/Cm5mtO8T7k on @architosh

  6. RT @SketchUpBryce: Great article on simplicity and construction from @jbacus – https://t.co/OjLvvP6qwa

  7. Viewpoint: It’s the Simple Stuff That Matters | Architosh https://t.co/JFcYKEkmbK #Sketchup from @jbacus https://t.co/z1M0FJkeGo

  8. Viewpoint: It’s the Simple Stuff That Matters | Architosh https://t.co/JFcYKEkmbK #Sketchup from @jbacus https://t.co/z1M0FJkeGo

  9. Viewpoint: It’s the Simple Stuff That Matters | Architosh https://t.co/6eCqwODufA

  10. Viewpoint: It’s the Simple Stuff That Matters | Architosh https://t.co/6eCqwODufA

  11. RT @jbacus: Thanks to the @Architosh gang for publishing my essay “It’s the Simple Stuff That Matters” https://t.co/RuaFgrq8bY Thoughts, an…

  12. RT @jbacus: Thanks to the @Architosh gang for publishing my essay “It’s the Simple Stuff That Matters” https://t.co/RuaFgrq8bY Thoughts, an…

  13. RT @jbacus: Thanks to the @Architosh gang for publishing my essay “It’s the Simple Stuff That Matters” https://t.co/RuaFgrq8bY Thoughts, an…

  14. RT @jbacus: Thanks to the @Architosh gang for publishing my essay “It’s the Simple Stuff That Matters” https://t.co/RuaFgrq8bY Thoughts, an…

  15. RT @SketchUp: Simple is powerful. What’s that mean anyway? Read: https://t.co/Cm5mtO8T7k on @architosh

  16. RT @SketchUp: Simple is powerful. What’s that mean anyway? Read: https://t.co/Cm5mtO8T7k on @architosh

  17. RT @jbacus: Thanks to the @Architosh gang for publishing my essay “It’s the Simple Stuff That Matters” https://t.co/RuaFgrq8bY Thoughts, an…

  18. RT @jbacus: Thanks to the @Architosh gang for publishing my essay “It’s the Simple Stuff That Matters” https://t.co/RuaFgrq8bY Thoughts, an…

  19. RT @jbacus: Thanks to the @Architosh gang for publishing my essay “It’s the Simple Stuff That Matters” https://t.co/RuaFgrq8bY Thoughts, an…

  20. […] Viewpoint: It's the Simple Stuff That Matters In 1974, shortly after graduating from the Cooper Union School of Architecture, George Chaikin invented a quietly elegant technique for drafting curved lines of remarkable complexity using only a compass and straightedge. “Chaikin's Algorithm”, as it … Read more on Architosh (press release) (blog) […]

Comments are closed.

INSIDER Xpresso keeps CAD industry professionals up-to-date on next-gen emerging technologies (emTech) that will revolutionize the worlds of AEC and manufacturing and design. As an Xpresso reader, you will hear from some of the most important voices inventing and using the very latest tech in areas such as AI, machine learning, algorithm-aided design (AAD), AR, VR, MR, 3D printing, 3D computer vision, robotics, and SmartCities technologies.

Each issue arrives in your inbox on the first Sunday of the month. Issue #1 arrived on March 3, 2019. Full archives and easy navigation for your pleasure. Enjoy! 

Sign-up for our monthly newsletter
architosh INSIDER Xpresso.

  • Architosh will never pass any of your information onto third parties.
  • For more information read our privacy policy.
  • It is easy to unsubscribe at any time. Follow the links in the newletter footer.

(Recommended. These infrequent sponsored emails help us to provide our Xpresso newsletter for free.)

 
INSIDER Membership

Read 3 free Feature or Analysis articles per month.

Or, subscribe now for unlimited full access to Architosh.