Nemetschek Vectorworks, Inc., in conjunction with Nemetschek Scia and the buildingSMART Alliance, will present part two of the AIA Continuing Education webinar “openBIM – Real Interoperability, Practical Collaboration” on Thursday, Jan 20, at 2:00pm EST.
This AIA continuing education webinar will be led by Jeffrey W. Oellette, Assoc. AIA, Project Architect at Nemetschek Vectorworks. The webinar will define openBIM and IFC and explain the advantages of using openBIM workflows and IFC technology. It will also demonstrate a case study in the use of openBIM workflows using architectural, structural and HVAC BIM-authoring tools.
“This webinar will take our discussion of the principles of openBIM and IFC to the next level, using the DC Riverside Office Building project as an example,” said Ouellette. “This urban commercial development proposal is a demonstration of true interoperability, as it involved the exchange and coordination of important model information between Vectorworks Architect, Scia Engineer and DDS-CAD MEP.”
01 - Screenshot of part 1 of the openBIM webinar by Nemetschek Vectorworks.
Nemetschek Vectorworks has been touting its BIM capabilities through a series titled “openBIM”, focused on demonstrating Vectorworks Architect’s capabilities with exchanging BIM (Building Information Modeling) data via IFC (Industry Foundation Classes), an open industry standard supported by more than 70 international vendors of software tools in AEC.
To register for this webinar, visit: https://www2.gotomeeting.com/register/257444827.